Pest-X
the ultimate in Pest/Animal control. Pest –X is a polycarbonate
device for repelling all types of pest animals, such as medium to
large Birds: Pigeons Seagulls Mynas and waterfowl from roosting on
parapet walls, windowsills, pipes, RSJs, TV Antennas etc.
Pest-X is also
a useful device to prevent possums and cats climbing trees to
access the roof of your building. It’s also a very useful product
to help prevent dogs and cats from jumping over your fence to
either get in or out of your property. It will help to prevent
intruders from accessing your property.
The major
advantage of this product is its once only initial cost and
long-term effects. It is manufactured from polycarbonate,
combining the clarity of glass with the toughness of metal.
Polycarbonate is UV resistant and will remain stable and does not
become brittle like normal plastics.
Installation
of Pest-X is a simple task; all that is required is a pair of snips
and neutral cure silicone. The product is easily cut to size and
prior to gluing the product down the surface must be cleaned of all
grease, dirt and other debris.
Multiple rows
of Pest-X may be required for example to prevent cats and possums
from climbing trees, we recommend three rows of Pest-X be screwed
or nailed around the girth of the tree.
Each row needs
to be approximately 90mm apart. The first row of Pest-X should be
fixed approximately 1.8 metres above the ground and it is important
to make sure other trees or structures don’t come close to the tree
above the Pest-X spikes, as the Possum or cat may use this
structure to access the tree above the spikes.
For Bird
control on thin ledges, one row of Pest-X is required. For wider
ledges and medium size birds rows of Pest-X should be glued at 60mm
apart for larger birds such as Pigeons and Seagulls the rows can be
glued at 80mm apart.
Pest-X can be
glued, cable tied to pipes nailed or screwed. It is recommended
before nailing or screwing that pilot holes be drilled into the
base of the Pest-X to prevent the product from splitting.
Pest-X can be purchased directly from the manufacturer On the Mark
Solutions Pty Ltd or through your local hardware chain.
It is available from On the Mark Solutions or Bunnings hardware
chain and other independent hardware retailers. Each box
contains 36 lineal metres. Please contact us for pricing
on 0409 526 758
information
The
Eliminator Pigeon Trap is a new style of bird trap that has the
ability of being able to be collapsed for easy transport and access
to the trapping area. 
The
Judas trap was invented and manufactured by On the Mark Solutions
Pty Ltd. The Director of On the Mark Solutions is a
second-generation Pest/Bird controller and has a lifetime of
experience. It was obvious there was a need in the pest control
industry that allowed the operator to set a trap up within only a
few minutes on the ground in parkland, schools, tip sites or for
that matter, anywhere where pest birds regularly congregate to feed
off the ground.